Show simple item record

dc.contributor.advisorWaggoner, Charles
dc.contributor.advisorToghiani, Rebecca K.
dc.contributor.authorHogancamp, Kristina
dc.date2005
dc.date.accessioned2020-05-07T18:43:07Z
dc.date.available2020-05-07T18:43:07Z
dc.identifier.urihttps://hdl.handle.net/11668/17389
dc.description.abstractThe Diagnostic Instrumentation and Analysis Laboratory (DIAL) at Mississippi State University was awarded a project to study the feasibility of measuring particulate matter downstream of a high efficiency particulate air (HEPA) filter by testing commercially available equipment used to monitor the downstream side of a HEPA filter. In order to perform the work required for this project, a test stand to accommodate a 12? x 12? x 11.5? HEPA filter with a rated flow of 250 standard cubic feet per minute (scfm) was constructed. The test stand required an aerosol generator capable of producing a mass loading rate of 30 mg/m3 of dry aerosol at the face of the HEPA filter. It was determined that there was not a commercially available aerosol generator that quite fit the needs of the project. Therefore, it was necessary to develop an aerosol generator with the capabilities required for the project.
dc.publisherMississippi State University
dc.subject.lcshAir filters--Testing.
dc.subject.lcshAerosols--Diagnostic use.
dc.subject.otherHEPA filter
dc.subject.otheraerosol generation
dc.titleDesign And Evaluation Of A Large Scale Aerosol Generator
dc.typeThesis
dc.publisher.departmentDave C. Swalm School of Chemical Engineering.
dc.publisher.collegeBagley College of Engineering
dc.date.authorbirth1976
dc.subject.degreeMaster of Science
dc.subject.majorChemical Engineering
dc.contributor.committeeGeorge, Clifford E.


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record